Samsung SCV-3120 User Manual Download Page 35

Page: 35 / 40

English

●

me
RA
Se
TU
p

oTHeR SeT

You can reset the system by running FACTORY DEFAULTS, or set the font color etc.

Select <MAIN MENU>-<OTHER SET>.
Select each item and set appropriately.

LANGUAGe

You can set the language of the user interface using

buttons.

FACToRy deFAULTS

When selected, the <

FACToRy deFAULTS

> screen

appears and you can reset all settings to the factory
default settings by selecting the <

>. However, the

protocol, baud rate, address and the language settings
will not be reset.

Note that the resetting the system to the factory
default will erase all settings data.

oSd CoLoR

Selects the color of the on-screen display font.

1.
2.



FACTORY DEFAULTS

CANCEL



OTHER SET



LANGUAGE

ENGLISH

FACTORY DEFAULTS

OSD COLOR

ALARM SET

ALARm SeT

You may set Alarm in, Delay time and Alarm out

option in Alarm setup menu.
The Delay time arranges from 1 to 60 seconds. It is

set as 5 seconds in default.
If MOTION and FIXED/MOVED option are set as on,

camera would send off alarm beep after detecting the

moving object.

Whenever there is alarm signal, camera would send

off alarm beep if you set alarm as on.

ALARM SET

ALARM IN

OFF

DELAY TIME

5 SEC

ALARM OUT

MOTION

FIXED/MOVED

ALARM

Z6809126301A-SCV-3120-PAL-ENG.in35 35

2010-4-30 17:37:40

Summary of Contents for SCV-3120









































Search results

Summary of Contents for SCV-3120

Reviews:

Related manuals for SCV-3120

Brands by name

Popular brands

Samsung SCV-3120, User Manual

Search results

Summary of Contents for SCV-3120

Reviews:

Related manuals for SCV-3120

Brands by name

Popular brands