_
camera setup
camera setup
dAy/NIGHT
You can specify a recording mode according to the scene.
Select <CAMERA SET> - <DAY/NIGHT>.
Select a screen transition mode according to
the illumination, and set options as appropriate.
DAY : Fixed to DAY mode, regardless of the
scene.
NIGHT : Fixed to NIGHT mode, regardless
of the scene.
If BURST is set to <
oN
>, the burst signal
will be output along with the black-and-
white composite video signal.
AUTO : According to the luminance, this will
switch DAY to NIGHT mode, or vice versa.
BURST : If set to <
oFF
>, the burst signal will
not be output in NIGHT mode.
DAY
NIGHT BRIGHTNESS : Specify the
brightness level switching from COLOR to
BW filter.
Adjusting from HIGH to LOW will cause to
switch the filter in a darker screen.
DAY
NIGHT DWELL TIME : Time
required to determine the filter switch.
NIGHT
DAY BRIGHTNESS : Specify the brightness level switching from BW
to COLOR filter. Adjusting from HIGH to LOW will cause to switch the filter in a
darker screen.
NIGHT
DAY DWELL TIME : Time required
to determine the filter switch.
MASK AREA : If there exists a bright spot
light source in a night scene, you can
specify the size and position as needed.
This will prevent an error in switching filter,
or failure to determine the filter switch in
a night scene where a bright spot light
source exists.
Any excessively bright area in a night scene
will be MASKed.
You can specify MASK 1 and 2 simultaneously.
1.
2.
-
-
-
-
-
-
AUTO
BURST
OFF
DAY
NIGHT
BRIGHTNESS
MID
DWELL TIME
2SEC
NIGHT
DAY
BRIGHTNESS
MID
DWELL TIME
5SEC
MASK AREA
1 2
MASK AREA
<SIZE>
<LOCATION>
DAY/NIGHT
AUTO
WHITE BAL
FOCUS MODE
ONEAF
ZOOM SPEED [3]
DISPLAY ZOOM
OFF
DIGITAL ZOOM
OFF
DETAIL
[2]
V-SYNC
(INT)---
AGC COLOR SUP
MID
Z6809126301A-SCV-3120-PAL-ENG.in26 26
2010-4-30 17:37:39
