32_ setup
setup
DETECT AREA : Defines the Motion
Detection area.
MASK AREA : Specify a detection
exception area to mask.
Select a mask area
number and specify the
size and position.
▶
AREA : You can select up to 4 areas.
▶
MODE : Determines whether to use the
area selected in the AREA.
▶
TOP / BOTTOM / LEFT / RIGHT :
Adjust the size and position of the
selected area.
DETECT AREA
1. TOP
IIIIIIIIIIIIIIIIIIIIIIIII
1
2. BOTTOM
IIIIIIIIIIIIIIIIIIIII
50
3. LEFT
IIIIIIIIIIIIIIIIIIIIIIIII
1
4. RIGHT
IIIIIIIIIIIIIIIIIIIII
50
5. RETURN
MASK AREA
▶
1. AREA
AREA1
2. MODE
OFF
3. TOP
IIIII
IIIIIIIIIIIIIIIIIIII
30
4. BOTTOM
IIIIIII
IIIIIIIIIIIIIIIII
110
5. LEFT
IIIIIIIIIIIIIIIIIIIIIIIII
25
6. RIGHT
IIIIIII
IIIIIIIIIIIIIIIII
110
7. RETURN
SCV-3081-ENG.indd 32
2011-5-3 14:19:41
-
-
▶
RETURN :
SENSITIVITY : Set the sensitivity of the motion detection. When adjusting
the sensitivity, note that the lower the level means the higher
sensitivity.
DET. SIZE : Selects an object size to detect on the screen. When adjusting
the detection size, note that the higher the level means the bigger
detection size.
RETURN : Select this to save the INTELLIGENCE menu settings and return to
the SPECIAL menu.
Select this to save the MASK
AREA menu settings and
return to the INTELLIGENCE
menu.
-
-
-
pRIVACy
: Mask an area you want to hide on the screen,
1
When the SPECIAL menu screen is
displayed, press the Function Setup
switch so that the arrow indicates
‘PRIVACY’.
2
Set up the mode using the Function
Setup switch.
AREA: You can select up to 12 PRI
MODE : Determines whether to use
the area selected in the AREA
SEL.
-
-
PRIVACY AREA SETUP
▶
1.AREA
AREA1
2.MODE
OFF
3.MASK COLOR
GREEN
4.TRANSPARENCY
OFF
5.SEL POS
L_TOP
6.XPOS
IIIIIIIIIIIIIIIIIIIII
10
7.YPOS
IIIIIIIIIIIIIIIIIIIII
10
8.RETURN
VACY
areas.
