76_
setup
setup
Others :
Here you can confi gure the settings of other options than Auto Track.
Zone Setting :
Position : Enables the designation of certain areas as zones for the Auto Track operation.
The setting procedures are the same as for Area Mask.
Mode : Two modes are available: Mask and Alarm. When Mask is selected, the camera does not
follow the object entering the masked zone. This is useful if the camera catches swaying
objects such as tree branches and flags during the Auto Track peration.When Alarm is
selected, the camera activates an alarm if an object enters the zone.
ON/OFF : Activates or deactivates the Zone function.
Indicator : Indicates objects with icons on the screen.
OFF: Do not display the indicator.
Indicator (
) : Indicates both the pointer and target.
Indicator 1 (
) : If a movement is detected, a cross mark will be displayed in the center of the screen.
Indicator 2 (
) : when a moving object is detected, a square grid appears and surrounds the object.
Target Lock : Target Lock is useful to select and follow an object using the Auto Track mode while
operating the camera with the joystick. Target Lock can be turned On or Off.
To activate the Auto Track mode, turn on Target Lock, select an object to follow, and
then press Enter.
Notes for using Auto Track
Auto Track is specifi cally to track down intruders. Thus, it may not be suitable to monitor a crowd.
If the camera is not safely secured, tracking errors may occur.
An error may occur due to impurities or stains piling up on the dome cover of the camera.
Auto Track may not perform what you expected in a certain environment or condition.
The camera may not follow an object or tracking errors may occur under the following conditions:
If the contrast between an object and the background is low
If the camera lens is smeared with foreign substances, e.g. raindrops or snowfl akes
If the lighting is changing dramatically
If many movements around an object are detected
If an object moves vertically on the optic angle of the camera
If an object moves right under the camera installation position
If an object creates inconsistent light levels, e.g. the object is too shiny or fl ickering
In environments where there are light refl ections causing internal refl ections of camera, e.g. windows, shiny road
surfaces, and backlights
If an object moves behind large and tall objects, e.g. telephone poles
If an object moves too quickly
If the camera is vibrating
z
-
f
f
f
-
f
f
f
f
-
M
y
y
y
y
y
-
-
-
-
-
-
-
-
-
-
-
Summary of Contents for SCP-2330
Page 94: ...MEMO ...
Page 95: ...MEMO ...