English
- 7
●
IMPORTANT SAFETY INSTRUCTIONS
If the camera was turned on after being left at temperatures lower than -50° for a long duration:
If the internal temperature is lower than -20°, the camera does not transmit video signals and
displays a black screen along with the "Wait to warm up(xx Left)" message, instead of operating
properly.
If the internal temperature is higher than -20° and lower than -10°, the "Wait to warm up(xx Left)"
message disappears as the camera resets itself and enters the operation mode.
However, only manual P/T operation is in effect while the Sequence and Turbo commands are
limited in use.
If the internal temperature is higher than -10°, the camera activates all Sequence and Turbo commands.
The speed of the horizontal/vertical rotation will be deteriorated than normal at below -10 degrees for
the indoor model, and at below -40 degrees for the environmental model.
If the heater malfunctions, a message appears as follows.
"Please Check Heater System"
If this message appears, turn off the camera and call where you bought.
DETAILED WARNINGS AND CAUTIONS (SCP-2370TH/SCP-3370TH)
The following cautions are for the Auto Track function built-in with the SCP-2370TH/SCP-3370TH;
To use Auto Track to its full potential, please read and be aware of the following cautions. Neglecting the
cautions may cause unsatisfactory performance of the tracking function as well as camera malfunctions.
Auto Track is specifi cally to track down unknown intruders. It is not be suitable to monitor a crowd.
If the camera is not safely secured, tracking errors may occur.
If the camera lens is smeared with foreign substances, snow fl akes, or raindrops, the camera may incur
unsatisfactory performance in the tracking function. For optimal performance, please install the camera in
an environment safe from contamination, and clean the camera lens on regular basis.
It may not operate properly in a low contrast condition at night.
If the tracking function shows poor performance at nighttime or under low light circumstances, use the
Sens-Up function.
Auto Track may have errors at times when pronounced shadows are created: e.g. sunrise and sunset.
The camera may catch and follow unintended movements – car traffi c or swaying tree branches – during
the Auto Track operation. To prevent and correct such errors, adjust the installation direction and angle
of the camera, or use Zone Settings (Mask) (page 71).
Adjust the installation direction and angle of the camera, or use Zone Settings also under the following conditions:
With excessively bright light sources, under fl ickering lights, or if the camera displays internal refl ections.
When using Auto Track, it is recommended to adjust the tracking object size to 1/4 of the screen.
This feature may not perform as expected depending on the situation and circumstances. Samsung
Techwin is not responsible for injuries and fi nancial damage caused by the situation described above.
5.
-
-
-
6.
7.
-
-
y
y
y
y
y
y
y
y
y
y
Samsung Techwin cares for the environment at all product manufacturing stages to
preserve the environment, and is taking a number of steps to provide customers with
more environment-friendly products.The Eco mark represents Samsung Techwin’s
will to create environment-friendly products, and indicates that the product satisfies
the EU RoHS Directive.
Summary of Contents for SCP-2330
Page 94: ...MEMO ...
Page 95: ...MEMO ...
