Samsung SCO-2370, User Manual

Page: 7 / 29

introduction
12_ introduction English_13
●
INSTALLATION & CONNECTION
COMPONENT NAMES AND FUNCTIONS
Heater & Fan
This product is equipped with a built-in heater & fan that helps maintaining operational
temperature and humidity.
Front cover
Heater
Fan
CONNECTING TO MONITOR
Please connect the video output terminal located on the back of the camera to the monitor.
CCD Camera
Monitor
The connection method varies depending on the type of monitor and accessories.Please
refer to the user’s manual for each instrument.
Please turn off the power when connecting.
y
y
installation & connection
While powered, the heater & fan operates according to the camera’s internal temperature.
Check heater & fan operation with given internal temperature by referring to the below:
While the camera is powered, the heater & fan operates if its internal temperature drops
below -10 °C. When the camera’s internal temperature reaches -5 °C, the heater & fan
stops operating.
While the camera is powered and its internal temperature is between -50 °C ~ -15 °C,
the message “Low Temperature Wait” appears. When it reaches -15 °C, the camera is
initialized and video begins output.
When the camera’s internal temperature reaches 40 °C, the fan starts operating.
If the camera’s internal temperature reaches 80 °C, it will be initialized.
Be careful not to touch the heater while installing if the ambient temperature is below than -10°C,
since the heater may operate immediately after applying the power.
If the front cover is cross threaded or not correctly tightened the camera housing will not be weatherproof.
When you combine the front cover, combine the triangle of front cover and triangle of main body
confront each other.
1.
y
y
y
M


