54
55
V
Vo
oiicce
e D
Diia
all
V
Vo
oiicce
e D
Diia
all
Tips on Recording Name
• Avoid recording similar names phonetically. If you record a
similar name to the one already in memory, the phone
requests another name.
• Speak clearly and naturally.
• The person who will use the phone should record the name.
The phone does not recognize the name if the voice sounds
differently.
• Avoid too long or too short name. It is recommended to
contain 2 to 5 syllables.
• If this feature does not work properly, erase the name, and
record with another name.
• It is recommended to practice several times to obtain best
result.
• You can record up to 99 names. If you try to record more
than 99, the phone announces ’Memory is full’.
Review
Menu 5-2
This option allows you to check or erase an individual voice
dial entry. A list of entries displays.
Press the digit key to select the desired entry, or press the
key to scan entries.
When you select the desired entry, the recorded name plays
audibly.
If you want to erase the selected entry, press the key
while the name is playing.
OK/
Erase All
Menu 5-3
This option allows you to delete all voice dialing entries.
Press the key, to confirm the deletion. Otherwise, press
or to exit this menu without deleting the voice
dialing entries.
Set Active
Menu 5-4
Voice Dialing is always active once you have recorded a name
and have entered the associated phone number. To place a
call using Voice Dialing, simply press and hold the key
in the idle mode and then say the name into the phone after
you hear the prompt.
You can also initiate a Voice Dialing call just by opening the
flip, when you select this option.
[ ] only:
Enables Voice Dialing only by pressing and holding
the key.
[ ] /Flip (?):
Enables Voice Dialing by pressing and holding
the key or by opening the flip.
OK/
END
CLR/
