19
18
G
Ge
ettttiin
ng
g S
Stta
arrtte
ed
d
General Functions
Making a Call
In Standby mode, key in the area code and phone number and
press the
key.
Note
: If you have set
Auto Retry
option (
6-1
) to
On
(see page
xx), and the call does not connect, the phone
automatically retries to make the call.
Correcting the Number
To clear ...
Then ....
The last digit displayed
Press
.
The whole display
Hold down
for more than
one second.
Ending a Call
When you have finished your call, briefly press or close
the flip.
SEND
END
CLR/
CLR/
Standby Mode
Standby is the most basic state of your phone. The phone
goes into Standby mode soon after you turn it on, or
whenever you briefly press the key. When your phone is
in Standby mode, you will typically see the greeting message
and current date and time. If you enter a phone number, you
can press the key to dial it, or press the key to
save it in the internal phone book.
Press the key at any time to return to Standby mode. Be
careful; if you are on a call when you press the key, you
will return to Standby mode, but it also disconnects the call.
Press the key several times or hold it down to return to
Standby mode without ending the call.
Power Save Mode
Your phone comes with a
Power Save
feature that will
automatically be activated if your phone is unable to find a
signal after 15 minutes of searching. While this feature is
active, the phone’s battery charge is conserved. The phone
will automatically recheck for a signal periodically. To
manually force the phone to recheck for a signal, press any
key. A message on the display will let you know when your
phone is operating in
Power Save Mode
.
END
END
END
SEND
OK/
OK/
