Samsung SCD55, Service Manual

Page: 15 / 129

Samsung Electronics 3-1
3. Alignment and Adjustment
3-1. VCR Adjustment
3-1-1. VCR Adjustment Preparation
1. How to get into the VCR adjust mode.
ADJ ->
PLAY
0: 27:00: 00
V-REF : 6BH
SP
27MIN
FF 01 80
Indicates the adjusted values
Indicates current adjustment item.
Indicates current value in the ZOOM
switch.
1) Connect the power source.
2) Set the mode switch of the video camera
to "PLAYER" position.
3) Insert standard tape into the video camera
and set to "PLAY" position.
STEP 1
1) Press and hold the "PLAY" button on the
video camera or the remote control and
"DOWN( )" button on the video camera
at the same time for more than 10 sec-
onds.
2) When monitor OSD appears as shown
below, VCR adjustment mode has been
activated successfully.
3) When changing the adjustment item after
the adjusted value is designated, press the
“START/STOP” button.
STEP 2
S64 L00