Samsung SCD55, Service Manual

Page: 41 / 129

Samsung Electronics 3-27
Alignment and Adjustment
3-3. LCD Adjustment
Notes: For LCD adjustment, use the buttons on the video camera and the remote control.
After each adjustment step is completed, OSD shows "OK".
EEPROM(ICL202) stores confirmed adjustment value of each adjustment step.
After finishing the adjustment, turn power off.
Note: In service adjustment mode, button names are different from those in customer function control
mode.
When monitor OSD shows as above screen, LCD
adjustment mode has been activated successfully.
Note : "XX" indicates variable values.
1. How to get into the LCD adjust mode.
2. Functions of each button on the Remote Control
Monitor screen
Remote Control Button Location
LCD
VCO
EPR:XX EVR:XX
01
Description
Button
START/STOP (Confirm)
FF (Mode Up)
REW (Mode Down)
PLAY (Data Up)
STOP (Data Down)
Stores changed value in the adjustment mode.
Shift adjustment address to left.
Shift adjustment address to right.
Down value.
Up value.
1) Connect the power source
(battery/DC cable).
2) Set the "CAMERA/PLAYER" switch to
"CAMERA" position.
3) Camera screen and OSD appears.
4) Open housing of the video camera and
remove tape.
STEP 1
1) Press and hold the "EDIT(+)" button on the
video camera and "SELF TIMER" button
on the remote control at the same time for
more than 5 seconds.
2) Press the “DISPLAY” button to make color
bar appear.
STEP 2
START/STOP PHOTO WIDE
SELF TIMER DISPLAY TELE
SLOW STILL F.ADV
W
T