Samsung SCD-2080R, User Manual

Page: 23 / 40

English_23
●
SETUP
or
n
d
e
BLC : Enables a user to directly select a desired area from a picture, and to view
the area more clearly.
LEVEL : Adjust level of the BLC function.
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HLC (High Light Compensation) :
This function masks the strong light to minimize white out due to over exposure and
preserve much of the on-screen details when the camera aims a strong light source.
LEVEL : Adjust level of the HLC function.
LIMIT : Enable to change the operating condition.
MASK COLOR/TONE :
Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta)
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
OFF : Not being used
Select a desired mode using the Function Setup switch and press the switch.
BLC SETUP
䯝
LEVEL MIDDLE
TOP
IIIII
Â
IIIIIIIIIIIIIIII
38
BOTTOM
IIIIIIIIIIIIIIIIII
Â
III
109
LEFT
IIIIII
Â
IIIIIIIIIIIIIII
54
RIGHT
IIIIIIIIIIIIIIII
Â
IIIII
121
Press SET to Return
Select ‘BLC’ to adjust the area to be
enhanced then adjust the level.
HLC SETUP
䯝
LEVEL MIDDLE
LIMIT NIGHT ONLY
MASK COLOR BLACK
MASK TONE Â
IIIIIIIIIIIIIIIIIIIII
1
TOP Â
IIIIIIIIIIIIIIIIIIIII
5
BOTTOM
IIIIIIIIIIIIIIIIII
Â
III
120
LEFT Â
IIIIIIIIIIIIIIIIIIIII
5
RIGHT
IIIIIIIIIIIIIIIIIIII
Â
I
172
Press SET to Return
HLC : Enable the user to change the level,
limit, mask color/tone and area.
Because there can be a difference in the effectiveness of HLC according to the amount of light
area in the screen, optimize the installation angle for the best HLC performance.
In a dark environment, the HLC is only activated when a high light that is larger than a certain area
is present.
The HLC is not activated in overly bright or dark condition. (In NIGHT ONLY mode.)
When HLC Function is used, D-ZOOM and DIS function are not activated.
BLC function does not work in B/W mode.
y
-
-
y
-
-
-
-
y
3.




