Samsung SCD-2022R, User Manual

Page: 21 / 36

ㅢ
ᮣ
English_21
●
SETUP
BACKLIGHT
1.
2.
When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the
Function Setup switch so that the arrow indicates BACKLIGHT .
Select a desired mode using the Function Setup switch depending on the camera
purpose.
UseR blC
: Enables a user to directly
select a desired area from a
picture, and to view the area
more clearly.
LEVEL : Adjust level of the BLC function.
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.

-
-
BLC SETUP
▶
1.LEVEL MIDDLE
2.TOP
IIIII

IIIIIIIIIIIIIIII
3.BOTTOM
IIIIIIIIIIIIIIIIII

III
IIIIII

IIIIIIIIIIIIIII
5. RIGHT

IIIII
6. RETURN
IIIIIIIIIIII IIII
HlC (High light Compensation) :
This function masks the strong light to
minimize white out due to over exposure and
preserve much of the on-screen details when
the camera aims a strong light source.
LEVEL : Adjusts the brightness level of a
monitoring area.
LIMIT :

-
-
- MASK COLOR :
HLC SETUP
▶
1. LEVEL MIDDLE
2. LIMIT NIGHT ONLY
3. MASK COLOR BLACK
4. RETURN
Enable to change the operating condition.
Off : Not being used

4.LEFT
Change the color of the masking area. (Black, Red, Blue, Gray, Magenta)
6615
This function reduces the background noise in a low luminance environment.
1.
When the SETUP menu screen is displayed, select 'SSNR3' by using the Function
Setup switch so that the arrow indicates 'SSNR3'.
2.

Off : Deactivates SSNR3. Noise is not reduced.

ON : Activates SSNR3 so that noise is reduced.
Select a desired mode using the Function Setup
switch.
SSNR3

IIIIIIIIIII
12
IIIIIIII IIIIII
▶
LEVEL
RETURN
1.
2.
The SCD-2022R/2042R is designed to deliver a distinctive subject and
the proprietary W6 DSP chip.
background
at the same time, even when the subject is backlight, by adopting a function of
3. Set the SSNR3 mode to 'ON' and press the Function Setup switch.
4.
Then you can adjust the noise reduction level.
9
24
25
84