Samsung SCD-2022R, User Manual

Page: 22 / 36

Setup
22_ Setup


You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE
menu is 'OFF'.
When adjusting the noise reduction level of the SSNR3 mode, remember that the higher
the level set, the more the noise level will be reduced but that after image may also occur.
2. Select a desired mode using the Left and Right buttons according to the picture display
DAY/ NIGHT
You can display pictures in color or black and white.
1.
When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up
and Down buttons so that the arrow indicates ‘DAY/NIGHT’.
you want.

AUTO
: The mode is switched to ’Color‘ in a normal environment, but switches to
’B/W‘ mode when ambient illumination is low. To set up the switching time
for AUTO mode, press the Function Setup switch. You can turn on or off
the burst signal on B/W mode.

COlOR : The picture is always displayed in color.

b/W

exTeRN
AUTO SETUP
▶
1.BURST MODE ON
2.COLOR

B/W
DURATION FAST
DWELL TIME 5 SEC
3.B/W

COLOR
DURATION
FAST
DWELL TIME 10 SEC
4.RETURN
BURST MODE :
DURATION :
-
-
DWELL TIME :
→
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
-
: Ground to the grounding terminal to allow automatic switching between COLOR
and B/W(Black/White).
You can turn on or off the
burst signal on B/W mode.
You can select the brightness
to night mode.
level at which the camera switches from day
You can select the duration
time about changing the day/night mode.
BW MODE SETUP
䯝
1.BURST MODE ON
2.IR MODE
3.RETURN
BURST MODE : - You can turn on or off
the burst signal on B/W mode.
: The picture is always displayed in black
and white.
IR MODE (HIGH/ LOW/ USER) : -
When IR LED is turned on in B/W, the
objects can be clearly identified due to the
function that decreases screen saturation
of objects within a short distance.
TOP/BOTTOM/LEFT/RIGHT :
•
range according to the location of objects.
IR MODE SETUP
䯝
IR MODE 1. HIGH
Press SET to Return
After selecting USER, you can adjust the
When AGC in the EXPOSURE menu is 'OFF', AUTO mode is not available to select.
