Samsung SCC-3100A, User Manual

Page: 6 / 50

SYSTEM CONTROLLER SYSTEM CONTROLLER User’s Manual User’s Manual
11
ENGLISH
10
6. Connection Through SVR-1650/1640/950/440
PTZ
Dome Camera
PTZ
Dome Camera
SVR-1650/1640/950/440 : 255 max.
Junction Box Junction Box
Sub-Controller
(a maximum of 15
connections allowed)
Master Controller
System Overview Names and Functions of Each Part
1.Camera Setup Section
RESET : Resets camera power.
PRESET : Moves camera to the preset location (see p.21).
SWING : Continuously travels between two assigned locations
horizontally (pan) or vertically (tilt) (see p.22).
AUX 1 : Toggles the camera's external device AUX1 on and off.
GROUP : Repeats sequential surveillance of assigned preset locations
with preset movement rates and intervals (see p.23).
AUX 2 : Toggles the camera's external device AUX2 on and off.
TOUR : Sets more than 1 group for tour and performs
continuous group action (see p.24).
AUX 3 : Toggles the lights around the camera on and off.
AF : Sets the focus to automatic or manual after operating
the camera (see p.28).
OSD : Displays the camera OSD menu (see p. 29).
FUNCTION: Used to perform 2 functions or more at the same time (see p.12).
• Some buttons in the camera setup section may not be supported or may be
used differently depending on the camera manufacturer.
Caution
Buttons supported by different manufacturers
• SVR-1630 cannot use general connection.
5. General Connection
PTZ
Dome Camera
CCD Camera
DVR
Dome DVR: 255 max.
Junction Box Junction Box
Sub-Controller
(a maximum of 15
connections allowed)
Master Controller
: Controller Connection Cable
: RS-485/422
: Video Cable
Remarks
RESET
PRESET
TOUR
SWING
GROUP
AF
OSD
AUX 1 Applies only to systems with AUX 1 terminals. (SRX-100B only)
AUX 2 Applies only to systems with AUX 2 terminals. (SRX-100B only)
AUX 3
Applies only to systems with housing and receivers that support the light function. (SRX-100B only)
SPD-3300
O
O
O
O
O
O
O
SPD-3000
O
O
O
O
O
O
O
SPD-2300
O
O
O
O
O
O
O
SPD-2500
O
O
O
O
O
O
O
SPD-2200
O
O
O
O
O
O
O
SPD-1600
O
O
O
O
O
O
O
PELCO-D
O
O
X
X
X
O
O
PANASONIC
(WV-CS854A)
O
O
X
O(AUTO-PAN)
O(AUTO-PAN)
O
O
SAMSUNG
ELECTRONICS
(SCC-643/641)
X
O
X
O(SCAN)
O
O
BOSCH
(G3A series)
X
O
X
X
X
X
O
PELCO-P protocol supports only the functions of Preset, Reset, OSD, Swing(Auto-Pan) only.