![background image](http://html.mh-extra.com/html/samsung/scc-3100/scc-3100_user-manual_341011007.webp)
SYSTEM CONTROLLER
SYSTEM CONTROLLER
User’s Manual
User’s Manual
12
11
Names and Functions of Each Part
Names and Functions of Each Part
2. Number Pad
3.External Device Selectors
0 ~ 9 : Used for entering camera ID, channel number, monitor
number, DVR ID, etc. (see p.25).
F + 0 : Activates the system setup menu (see p.26).
-F : FUNCTION
/
: Used for increasing or decreasing menu values in
detailed setup menus.
PTZ
: Selects the PTZ mode (see p.19~28).
DVR
: Selects the DVR mode (see p.29).
CAMERA : Enter camera number and press the CAMERA button to set the camera ID
(PTZ mode) or set the channel (DVR mode).
MONITOR : Selects the MATRIX mode
4. Universal Controller
ZOOM W/T : Performs camera zoom action (wide and
telephoto).
FOCUS -/+ : Used for manual focus adjustment.
: Used for moving the menu cursor up (when menu
is active), pausing DVR playback, or playing stills.
: Used for moving the menu cursor down (when
menu is active) or stopping DVR playback.
: Used for moving the menu cursor left (when
menu is active) or playing recorded video in the reverse direction.
: Used for moving the menu cursor right (when menu is active) or Fast Playback.
: Used for playing recorded video.
ESC
: canceling entered values, or moving to the previous stage.
ENTER :
Used for executing the entered values and performing setups (PTZ mode and DVR mode)
F+1
F+2
F+3
F+4
F+5
SPD-3300
TRACE RUN
TRACE
MEMORY
TRACE
MEMORY STOP
AUTO POWER
ON
AUTO POWER
OFF
SPD-3000
TRACE RUN
TRACE
MEMORY
TRACE
MEMORY STOP
AUTO POWER
ON
AUTO POWER
OFF
SPD-2300
TRACE RUN
TRACE
MEMORY
TRACE
MEMORY STOP
AUTO POWER
ON
AUTO POWER
OFF
SPD-2500
TRACE RUN
TRACE
MEMORY
TRACE
MEMORY STOP
AUTO POWER
ON
AUTO POWER
OFF
SPD-2200
TRACE RUN
TRACE
MEMORY
TRACE
MEMORY STOP
AUTO POWER
ON
AUTO POWER
OFF
SPD-1600
TRACE RUN
TRACE
MEMORY
TRACE
MEMORY STOP
AUTO POWER
ON
AUTO POWER
OFF
PELCO-D
TRACE RUN
(PATTERN)
PANASONIC
(WV-CS854A)
TRACE RUN
(PATTERN)
F2
(SPECIAL 2)
F3
AUTO-SORT
SAMSUNG
ELECTRONICS
(SCC-643/641)
TRACE RUN
(PATTERN 1)
TRACE RUN
(PATTERN 2)
TRACE RUN
(PATTERN 3)
• When using functions that are performed by a combination of the function
button and numeric keys, the setup may be different depending on the camera
manufacturer.
• Use the AUTO POWER ON setting to allow the camera to resume the tasks in its
memory upon power supply, even if they were previously aborted as a result of
power failure, etc.
Caution
• In the SVR-430/1630 environment, the ESC button is used for recording the
surveillance camera screen. (The ESC button acts as a REC button.)
• In the SVR-430/1630 environment, the ENTER button is used for playing the
recorded video in the reverse direction. (The ENTER button acts as a DIR button.)
Note