SYSTEM CONTROLLER
SYSTEM CONTROLLER
User’s Manual
User’s Manual
20
19
1. PTZ Setup Mode
This menu is for setting up the PTZ camera function. It is impossible to operate Speed
Dome and DVR by sub-controllers when the master controller is set to on.
At the initial screen, press the Function button and
press the 0 button to activate the [SETUP SYSTEM]
menu.
Press the 1 button to activate the [PTZ SETUP 1 ]
menu.
Press the
button to activate the [
PTZ SETUP
2] menu.
At the [PTZ SETUP 1 ] menu, press the 1 button
(see p.19).
Use the joystick or camera control button (SCC-3100
model) to move the camera to the desired location
(move up, down, left, and right, and control zoom).
Enter a preset number.
Press the Enter button to assign the number to the
current location.
2. PRESET
SETUP SYSTEM
1:PTZ
2:DVR
3:CONTROLLER
Press Numeric Key
PTZ SETUP 1
1:PRESET 2:SWING
3:GROUP 4:TOUR
Press Numeric Key
PTZ SETUP 2
1:MODEL 2:TRACE
3:AF
Press Numeric Key
This menu is for setting the camera to move to preset locations.
PTZ SETUP 1
CAM ID:
5
SPD
PRESET NO: 0
Enter:Preset ID Set
PTZ SETUP 1
CAM ID:
5
SPD
PRESET NO: 1
Enter:Preset ID Set
PTZ CONTROL SYSTEM
CAM ID:
5
SPD
MONITOR:
1
[ 1 ]
Enter:Preset ID Set
The menu may be different depending on the PTZ camera model.
• Press the ESC button to move to an upper setup mode.
Reference
Menu
Models supported
Menu
Models supported
PRESET
SPD series, PELCO-D, PANASONIC,
MODEL
SPD series, PELCO-D, PANASONIC,
SAMSUNG ELECTRONICS
SAMSUNG ELECTRONICS
SWING SPD
series TRACE
SPD series, PELCO-D,
PANASONIC
GROUP
SPD series
AF
SPD series, PELCO-D, PANASONIC,
SAMSUNG ELECTRONICS
TOUR
SPD series
-
-
2-1. PRESET Setup
In the initial screen, enter an assigned preset number.
The selected number will be shown in the [- - -] display.
Press the Preset button to move the camera to the preset location.
If the number entered is not within the selectable range, the last entered number is
taken as the first number. The selectable range for each camera model is as follows.
• SPD-3300/3000/2300: 1~128
• SPD-2500/2200/1600: 1 ~ 64
• PELCO-D : 1 ~ 80
Certain numbers have special functions other than preset.
33 + PRESET - FLIP COMMAND
97 + PRESET - RANDOM SCAN
98 + PRESET - FRAME SCAN
99 + PRESET - AUTO SCAN
See the camera manual for more information.
• PANASONIC (WV-CS854A) : 1 ~ 64
• Samsung (SCC-641/643) : 1 ~ 127
Preset setup is also available in the OSD menu of the connected camera.
2-2. PRESET Movement
PTZ Mode
PTZ Mode
