background image

1

IMPORTANT SAFEGUARDS

1. Read all instructions carefully. Before switching on, make sure that the voltage of 

your electricity supply is the same as that indicated on the rating plate on the bot-
tom of the cleaner.

2. WARNING:  Do not use the vacuum cleaner when rug or floor is wet. 

Do not use to suck up water.

3. Close supervision is necessary when any appliance is used by or near children. 

Do not allow the vacuum cleaner to be used as a toy. Do not allow the vacuum 
cleaner to run unattended at any time. Use the vacuum cleaner only for its intend-
ed use as described in these instructions.

4. Do not use the vacuum cleaner without a dust bin. Empty the dust bin before it is 

full in order to maintain the best efficiency.

5. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. 

Keep the vacuum cleaner away from stoves and other heat sources. Heat can 
deform and discolour the plastic parts of the unit.

6. Avoid picking up hard, sharp objects with the vacuum cleaner as they may dam-

age the cleaner parts. Do not stand on the hose assembly. Do not put weight on 
the hose. Do not block the suction or the exhaust port.

7. Switch the vacuum cleaner off on the body of the machine before unplugging from 

the electrical outlet. Disconnect the plug from the electrical outlet before changing 
the dust bag or dust container. To avoid damage, please remove the plug by 
grasping the plug itself, not by pulling on the cord.

8.  This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, 
unless they have been given supervision or instruction concerning use of the 
appliance by a person responsible for their safety.

   Children should be supervised to ensure that they do not play with the appliance.

9. The plug must be removed from the socket outlet before cleaning or maintaining 

the appliance.

10. The use of an extension cord is not recommended.

11.  If your vacuum cleaner is not operating correctly, switch off the power supply and 

consult    an authorized service agent.

12. If the supply cord is damaged, it must be replaced by the manufacturer or its ser-

vice agent or a similarly qualified person in order to avoid a hazard.

13. Don’t carry the vacuum cleaner by holding the hose.

Use the handle on the vacuum cleaner set.

DJ68-00321A (EN) (0.7).indd   2

DJ68-00321A (EN) (0.7).indd   2

2011.12.26   10:47:45 AM

2011.12.26   10:47:45 AM

Summary of Contents for SC8400 SERIES













Reviews: