Samsung SC-L610 Owner'S Instruction Book Download

Page: 22 / 71

Preparing

Connecting the Power Source

ENGLISH

✤

There are two ways to connect power source.
-

Using the AC Power Adapter : used for indoor recording.

Using the Battery Pack: used for outdoor recording.

To use the AC Power Adapter

1. Connect the AC Power Adapter to the AC cord.

2. Connect the AC cord to a wall socket.

Note: The plug and wall socket type may be different

depending on regional conditions.

3. Connect the other end of the DC cable to DC jack of

the camcorder.

4. To set the camcorder to the CAMERA mode.

a. Hold down the tab of the power switch and push

the switch to CAMERA mode.

b. Make sure that the Lens Cap is open.
c.

Open the LCD monitor and make sure that the image
appears in the LCD monitor.
-

The LCD monitor is turned on automatically when it’s opened more than 30 degrees.

Note: If the adapter is used next to a TV or the camcorder, it may cause the TV or camcorder

to emit noise. Move the adapter away from the TV, camcorder or the antenna cable.

4-a

CAMERA

Summary of Contents for SC-L610








































































Search results

Summary of Contents for SC-L610

Reviews:

Related manuals for SC-L610

Brands by name

Popular brands

Samsung SC-L610, Owner'S Instruction Book

Search results

Summary of Contents for SC-L610

Reviews:

Related manuals for SC-L610

Brands by name

Popular brands