04
_ English
preparation
CHARGING THE BATTERY PACK
• Use the
IA-BP85ST
battery pack only.
• The battery pack may be charged a little at the time of purchase.
• Be sure to charge the battery pack before you start using your HD
camcorder.
Inserting the battery pack
1.
Open the battery pack cover by sliding the
OPEN
switch upward
as shown in the figure.
2.
Insert the battery pack into the battery pack slot until it softly
clicks.
• Make sure that word mark (SAMSUNG) is facing left while the
camcorder is placed as shown in the figure.
3.
Close the battery pack cover.
Charging the battery pack
1.
Slide the
POWER
switch downward to turn off the power.
2.
Open the DC IN jack cover and connect the AC power adaptor to
the DC IN jack.
3.
Connect the AC power adaptor to a wall socket.
4.
Once charged, disconnect the AC power adaptor from the DC IN
jack on your HD camcorder.
• Even with the power switched off, the battery pack will still
discharge if it is left inserted in the HD camcorder.
Charging, recording and playback times with a fully charged battery pack
(with no zoom operation, LCD open, etc.)
Battery type
IA-BP85ST
Charging time
approx. 100 min
Recording format
Continuous recording time
Playback time
HD
approx. 85 min
approx. 120 min
SD
approx. 90 min
approx. 130 min
2008-03-19
