Samsung SC DC173U - Camcorder - 680 KP Page 87 Owner'S Instruction Book Download

Page: 87 / 128

ENGLISH

DVD Camcorder: Connection

Using the Voice Plus



The

Voice Plus

function works only in

Player mode



page 26



This function enables you to narrate over a pre-recorded disc via

the DVD Camcorder’s microphone.



When dubbing a DVD to other AV devices (DVD Recorder,

VCR), the Voice Plus feature dubs your voice from the internal

microphone of the DVD Camcorder, instead of copying the existing

audio on the DVD.

1. Connect the DVD Camcorder to your AV device with AV cable.



page 86

2. Set the

[Mode]

switch to

[DISC]

. (SC-DC173(U)/DC175/DC575 only)

3. Set the

[Power]

switch to

[

(Player)]

4. Insert the disc you wish to play back in this DVD Camcorder.

5. Press the

[Record Start/Stop]

button on a point where you want to start the

Voice Plus

feature during playback.



Voice Plus icon ( ) is displayed and

<Voice Plus>

will blink for a while.



Sound signals incoming from the internal microphone will be dubbed to a connected

AV device, instead of copying the pre-recorded sound on a disc.

6. To cancel, press the

[Record Start/Stop]

button again.

Notes



Voice Plus

is available only when the AV cable is connected. If a USB cable (SC-DC173(U)/

DC175/DC575 only) is connected, the

Voice Plus

function may not operate properly.



If you perform Stop, Play/Still, REW, or FF while the Voice Plus function is being executed,

the

Voice Plus

function will be deactivated.



When the

Voice Plus

function is in progress, the

[MENU]

button or

[PHOTO]

button does

not work.



The

Voice Plus

function does not affect the original sound on the recorded disc.



Sound is transferred from the internal microphone on this DVD Camcorder to the connected

AV device, when using the

Voice Plus

function. Make sure the microphone is not covered or blocked in any way.



Adjust the sound volume on the connected external device. (TV, audio system etc.)



Feedback may occur if the DVD Camcorder is placed near the speaker of an external device.



Turn down the volume of the external device and keep the DVD Camcorder a reasonable distance away.



30 min

-RW

0:00:20

001



30 min

-RW

0:00:20

001

Voice Plus

DVD Recorder/VCR

Signal ﬂow

AV Cable

DVD Camcorder

AD68-01230A_US_R2.indb 87

2007-07-09 ¿ÀÈÄ 1:03:50

Summary of Contents for SC DC173U - Camcorder - 680 KP

































































































































Search results

Summary of Contents for SC DC173U - Camcorder - 680 KP

Reviews:

Related manuals for SC DC173U - Camcorder - 680 KP

Brands by name

Popular brands

Samsung SC DC173U - Camcorder - 680 KP, Owner'S Instruction Book

Search results

Summary of Contents for SC DC173U - Camcorder - 680 KP

Reviews:

Related manuals for SC DC173U - Camcorder - 680 KP

Brands by name

Popular brands