Samsung SC-D73 Owner'S Instruction Book Download

Page: 96 / 102

ENGLISH

Troubleshooting

slow

There no card or memory in the camcorder.

Insert a card.

The CARD or memory is damaged.

Format a card or memory or change to a new card.

There is not enough memory to record.

Change to a new card or erase recorded image.

There are no images recorded on the SMC or

Record new images.

memory.

The card or memory is record protected.

Remove the protection label.

When you try to delete to protected image.

Cancel the image protection.

The camera can not playback.

Format a card or memory or insert card recorded
on this camcorder.

The camera can not record.

Format a card or memory or change to a new card.

The card or memory needs to format.

Format a card or memory.

FILE DELETE is progressing.

Wait until deleting is finished.

MEMORY FORMAT is progressing.

Wait until formatting is finished.

FILE COPY is progressing.

Wait until copying is finished.

NO MEMORY!

MEMORY IS FULL

NO STORED IMAGE

CONFIRM WRITE
PROTECTION

CONFIRM PROTECTION

MEMORY READ ERROR

MEMORY WRITE ERROR

NEED FORMAT
FILE DELETE

MEMORY FORMAT

FILE COPY

Display Blinking

Informs

that...

Action

Self Diagnosis Display in DSC made

Summary of Contents for SC-D73







































































































Search results

Summary of Contents for SC-D73

Reviews:

Related manuals for SC-D73

Brands by name

Popular brands

Samsung SC-D73, Owner'S Instruction Book

Search results

Summary of Contents for SC-D73

Reviews:

Related manuals for SC-D73

Brands by name

Popular brands