Samsung SC-D73 Page 11 Owner'S Instruction Book Download

Page: 11 / 102

ENGLISH

Do not film with the camera lens pointing directly at the sun.
Direct sunlight can damage the CCD(Charge Coupled Device).

1. Do not position the camcorder such that the viewfinder is pointing towards the sun.

Direct sunlight can damage the inside of the viewfinder.
Be careful when placing the camcorder under sunlight or by a window.

2. Do not pick up the camcorder by the viewfinder.
3. Over-rotation of the viewfinder may damage it.

1. The LCD display is manufactured using high precision technology.

However, there can be tiny dots(red, blue or green in color) that appear on the LCD display.
These dots are normal and do not affect the recorded picture in any way.

2. When you use the LCD display in direct sunlight or outdoors, it may be difficult to see the

picture.
If this occurs, we recommend that the viewfinder is used.

3. Direct sunlight can damage the LCD monitor.

To ensure a steady picture during recording, check that the hand strap is properly adjusted.

Do not force your hand into the hand strap as you could damage it.

Notices and Safety Instructions

Notice regarding the LENS

Notices regarding Record or Playback using LCD

Notices regarding the hand strap

Notices regarding electronic viewfinder

Summary of Contents for SC-D73







































































































Search results

Summary of Contents for SC-D73

Reviews:

Related manuals for SC-D73

Brands by name

Popular brands

Samsung SC-D73, Owner'S Instruction Book

Search results

Summary of Contents for SC-D73

Reviews:

Related manuals for SC-D73

Brands by name

Popular brands