background image

94

Specifications

General

Chapter  12

Model Name

SNOW-1810U

Power Supply

AC100-240V~ 50/60Hz
Based on the AC voltage of the adapter. For the DC voltage 
of the product, refer to the product label.

Environmental 
considerations

Operating

Temperature: 0 °C - 40 °C (32 °F - 104 °F)
Humidity: 10% - 80%, non-condensing

Storage

Temperature: -20 °C - 45 °C (-4 °F - 113 °F)
Humidity: 5% - 95%, non-condensing
* Applicable before the product package is unpacked.

Supported models

IW008J

IF012J, IF012J-E

IF015H, IF015H-E, IF020H, IF025H, IF025H-D, IF040H-D, 

IF040H-DL, IF060H-D, IF060H-DL, IF085H-DL 

 

"

Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-

way data exchange between the monitor and PC system optimises the monitor settings. 

Monitor installation takes place automatically. However, you can customise the installation 

settings if desired.

 

"

This device is a Class B digital apparatus.

 

"

For detailed device specifications, visit the Samsung Electronics website.

Summary of Contents for SBB-SNOWJAU




































































































Reviews: