Samsung SBB-SNOWJAU Page 85 User Manual Download

Page: 85 / 99

General

Smart Security

(HDMI-CEC)

HDMI Hot Plug

Custom Logo

Game Mode

Empty Storage

Audio Delay

Off

The displayed image may differ depending on the model.

HDMI Hot Plug

This feature is used to activate the time delay to turn on a HDMI source device.

•

Off

Custom Logo

You can download, select, and set the display time of a custom logo that appears when the product turns on.

•

Custom Logo

You can select a custom logo (image/video) or turn off the custom logo display.

You must download the custom logo from an external USB device to set the custom logo.

•

Logo Display Time

If the type of custom logo is

Image

, you can set the

Logo Display Time

•

Download Logo File

You can download a custom logo into the product from an external USB device.

The file name of the custom logo you want to download must be saved as “samsung” in all small letters.

When there are multiple numbers of external USB connections, the product will attempt to download the

custom logo from the last device that has been connected to the product.

Custom logo file restrictions

•

For image type custom logo, only bitmap files (aRGB 32bpp format) are supported.

•

The resolution of the image type custom logo must be between a minimum of 64 x 64 and the maximum

screen resolution. (Horizontal/Vertical values of the resolution must be multiples of 4.)

•

For video type custom logo, only TS Stream types are supported.

•

The maximum supported video file is 150 MB. The recommended length of a video file is 20 seconds or less.

Summary of Contents for SBB-SNOWJAU




































































































Search results

Summary of Contents for SBB-SNOWJAU

Reviews:

Related manuals for SBB-SNOWJAU

Brands by name

Popular brands

Samsung SBB-SNOWJAU, User Manual

Search results

Summary of Contents for SBB-SNOWJAU

Reviews:

Related manuals for SBB-SNOWJAU

Brands by name

Popular brands