Samsung SBB-SNOWJAU Page 78 User Manual Download

Page: 78 / 99

Eco Sensor

Automatically adjust the picture brightness based on the ambient light level.

•

Off

If the screen contrast is not sufficient, set the

Eco Sensor

Off

. If the

Eco Sensor

Off

, it may not comply with

energy standards.

Minimum Brightness

Automatically optimise the screen brightness according to the surroundings.

Eco Sensor

, the display brightness may change (become slightly darker or brighter) depending on the

surrounding light intensity.

Available only when

Eco Sensor

is set to

No Signal Power Off

Save power by turning the product off when no signal is received from any source.

•

Off

15 minutes

30 minutes

60 minutes

This function does not operate if the display is in the standby mode.

The product will automatically power off at a specified time. The time can be changed as required.

Auto Power Off

Choose how long the display will wait before turning off after no user interaction is detected.

•

Off

4 hours

6 hours

8 hours

Eco Solution

→

System

→

Eco Solution

→

Eco Solution

Minimum Brightness

Eco Sensor

No Signal Power Off

Auto Power Off

Off

15 minutes

4 hours

The displayed image may differ depending on the model.

Summary of Contents for SBB-SNOWJAU




































































































Search results

Summary of Contents for SBB-SNOWJAU

Reviews:

Related manuals for SBB-SNOWJAU

Brands by name

Popular brands

Samsung SBB-SNOWJAU, User Manual

Search results

Summary of Contents for SBB-SNOWJAU

Reviews:

Related manuals for SBB-SNOWJAU

Brands by name

Popular brands