System Manual – SAM-OCU-14 – 2013.12.05
Copyright ⓒ 2013 Samsung SDS Co., Ltd. All rights reserved | Confidential
- 9 -
1.4
General Specification
The table below shows the general specifications of the validator.
System
Item
Specification
Enclosure
Dimension(mm)
193.0(W) * 319.0(H) * 61.5(D)
Material
Outside steel of enclosure :
Material: PC-ABS
CPU Module
Processor
Samsung S5PV210, Cortex-A8 1GHz
Memory
RAM: 512MB, NAND Flash: 512MB
OS
ANDROID 4.0
Base Board Module
WiFi/Bluetooth Module
IEEE802.11b/g/n, Bluetooth 3.0+HS
GPS module
GPS RX Sensitivity: -164dBm
GPS Accuracy: 3m
Card Reader/Writer
CPU
STM32F417Zxx, ARM Cortex-M4
Program Memory
1024KBytes Flash Memory
Data Memory
192KBytes SRAM + BACK UP(4KBytes)
SRAM
512KBytes (model : CS18LV40963ECR70)
Display
LED for Display
– 4EA (Green, Blue, Red, Yellow)
LED for Debug
– 1EA (Red)
LED for Power
– 2EA (Red)
Communication
RS232 * 2
RF I/F
PN512
SIC9310
RC-S940
Standard
ISO14443 A/B, FeliCa, Mifare, ISO15693
Input Power
12V, 300mA
SAM
SIM socket 8EA
Barcode Reader
Image Sensor
CMOS Sensor, Max. 752*480, 8-bit grayscale
Target Distance
5~32.5Cm: Depends on code size
Symbologies
1/2 Dimensional
Touch screen display
5.7 inch
Resolution: 640 * 3(RGB) * 480
Touch method: 4-wire resistive
External Interface
USB 2.0 Host * 1
LAN * 1
RS232/485 * 2
CAN interface * 1
Antenna port *2
Speaker
Rated Input Power
1W, 8ohm
Power
Input voltage (V)
24 VDC
Table 1 General specification
