Samsung RZ32T Series User Manual Download

Page: 56 / 64

Maintenance

English

Maint

enanc

Fasten the

upper bracket (1)

- Fasten the

upper bracket (1)

with

the four

M5 x L16 hex screws

(12)

to secure the top part of the

refrigerators.

NOTE

Align the tops of the refrigerators before
fastening the upper bracket.

A: 7 mm

10.

Check the spacing between the

refrigerators.
- After fastening the upper and lower

brackets, make sure the spacing
between the refrigerators is 7 mm at
the top and bottom.

NOTE

If the spacing between the refrigerators is
greater than 7 mm, there may be less room
between the refrigerator and the cabinet,
and this may interfere when opening the
doors.

11.

Push the refrigerators into the cabinet.

- Have two people simultaneously

push the refrigerators, fixed with
brackets, into the cabinet.

NOTE

If the two people do not push the
refrigerators evenly, the rear parts of
the refrigerators may spread out or may
deviate from their intended spot.

12.

Adjust the height of the refrigerators.

- Turn the leveling leg right or left to

adjust the height of the refrigerators
to be flush with the cabinet.

Untitled-1 56

2021-12-10 10:57:46

Summary of Contents for RZ32T Series

































































Search results

Summary of Contents for RZ32T Series

Reviews:

Related manuals for RZ32T Series

Brands by name

Popular brands

Samsung RZ32T Series, User Manual

Search results

Summary of Contents for RZ32T Series

Reviews:

Related manuals for RZ32T Series

Brands by name

Popular brands