23
FULL DISASSEMBLY AND ASSEMBLY
Part Name
How To Do
Descriptive Picture
Ice Maker
① Remove the Ice Storage
Bin then lift up the cover of
Winter Closet to the direction
of the arrow mark to remove.
(Insert the spring into its seat
when assembling it again.)
② Pull the partition out with the
center of the helf pressed
down as shown in the
photo, and remove the 2
screws below at the right
left sides to disassemble the
Auger Motor Ass’y. Pull the
Ass’y out slightly to remove
the wire housing on the rear
left of the auger motor.
③ Loosen the 2 screws above
the Ice Maker and the
power cord housing, pull
the Ice Maker Kit beside
direction to disassemble.
④ Lift up the rear cover of
the Auger Motor Ass’
y to disassemble. When
replacing the Ice Maker
Geared Motor, remove the
2 screws indicated with the
arrow marks in the photo.
⑤ When replacing the Auger
Motor, remove the 4 screws
indicated with the arrow
marks and remove the
hexnut at the motor axis to
take the motor body and the
rotation blade apart, finally
remove the housings off the
parts to replace.
X
Y
Z
F-Room
Evaporator
① Loosen the 4 screws to
remove the upper cover
of the F-Room remove
the screw from the cover
of the F-Room Evaporator
after taking out the screw
cap. To remove the cover,
only remove the screw on
the inner side of the auger
motor support and have the
support hanging.
3-7) Ice Maker & Evap
