27
FULL DISASSEMBLY AND ASSEMBLY
Part Name
How To Do
Descriptive Picture
R-Room
Sensor
① Disassemble the front Intake
Grille from the retaining hook
at the back.
② Remove the 5 screws to
disassemble the upper
cover of the R-Room, and
unscrew the housing to
remove the sensor.
Caution
Make sure to atch the
housing colors. If not, it
can cause a fire.
R-Room
Evaporator
① Refer to how to remove the
Rroom Sensor to remove the
upper cover of R-Room, the
drain cover and the housing.
② Remove the screws on the
upper duct indicated with
a arrow to disconnect the
upper duct and remove the
2 screws that secure the
evaporator. Then, lower
the evaporator down slowly
in order not to have the
pipe bend. Remove the
front evaporator cover to
disassemble the relevant
parts as shown in the photo.
③ To remove the Fan Ass’
y, remove the 4 screws
that hold the Fan then
disassemble the housing.
④ To remove the
bimetal,remove the clamp
screws and pull the housing
out.
⑤ Pull the Defrost Sensor out
of the hole in the left side
plate
Caution
Make sure to have the lastic bag to wrap the
housing assembled with its opening face down in
order not to gather moisture or water.
