English - 17
SETTING
UP
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring during
installation, cut a large section of the cardboard
carton and place it under the refrigerator where
you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
When installing, servicing or cleaning
behind the refrigerator, be sure to pull the
unit straight out and push back in straight
after finishing.
Important
: Make sure that you can easily move
your refrigerator to its final location by measuring
doorways (both width and height), thresholds,
ceilings, stairways, etc.
The following chart details the exact height and
depth of this Samsung Side by Side Refrigerator.
CAUTION
Dimensions [inch (mm)]
Model
RS25H5121** RS25H5111** RS25H52****
Width
Only Cabinet
908
With Leg Front
915.5
Depth
Only Cabinet
784
With Door
857.5
With Handle
919
90° Open
F 1169 / R 1295.5
135° Open
F 1017.5 / R 1107
Height
Only Cabinet
1742.5
With Hinge
1776
With Door
1776
•
Allow clearance to the right, left, back
and top when installing.
This will help reduce power consumption
and keep your energy bills lower.
•
Make sure you disconnect the water supply line
BEFORE removing the freezer door.
To avoid damage, refer to ‘Separating the
water line from the refrigerator’ in the manual
(page 19).
DA68-02981C-00.indb 17
2014. 1. 28. �� 10:47
