Samsung RL62VCRS, User Manual

Page: 12 / 32

setting up your refrigerator
12_ setting up
Connecting the water line to the refrigerator
1. Remove the cap from water line on the unit and insert compression nut to the water line on the
unit after disassembling from provided water line.
2. Connect both water line from the unit and water line in the kit.
3. Tighten the compression nut onto the compression fitting. There should be no gaps between
(A, B & C )
4. Turn water on and check for any leakage.
Loosen a
Remove
cap
Water Line
from unit
No gap
Water Line
from unit
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make sure
you get a snug, leak-free connection.
• Samsung Warranty does not cover WATER LINE INSTALLATION.
• It will be done at customer’s charge unless the retail price includes
installation cost.
• Please contact Plumber or Authorized Installer for the installation if
needed.
• If Water leakage occurs due to improper installation, Please contact
installer.
Before being used, the leakage in these places should be examined
CAUTION
DA68-01817A-07.indd 12 2010.10.7 2:28:1 PM