Samsung RL62VCRS, User Manual

Page: 16 / 32

16_ setting up
Assemble the left upper hinge on the
left side by using 3 bolts and reattach
the ground wire using 1 screw. You can
get the hinge from the installation tool
box supplied with your new Samsung
refrigerator. (Be careful not to tip over
the fridge door and have wire damage.)
Assemble 2 connectors.
(If it is not connected, error message
will be shown on the display)
Replace the left upper hinge cover with
using 1 screw. You can get it from the
installation tool box supplied with your
new Samsung refrigerator.
Check the door alignment, opening, and
inner lamp operation by opening the
fridge and freezer doors.
Separate the cover on the left upper side
of refrigerator by removing 1 screw, and
reattach it on the right upper side. (Be
careful not to strip wire coating.)
setting up your refrigerator
①
Separate the stopper(
①
) by removing
3 screws on the right side. (Refer to
the picture.) And replace them on the
right side. Remove 3 screws on the left
side. (Refer to the picture.) And then,
replace the stopper(
①
) separated from
the right side. And reattach it by using
those removed 3 left side screws on the
left side. After removing cap on the upper left
side of fridge door, reattach the fridge
door on the right side.
8 13 14 6
6 6 6
7
1
Replace the freezer door on the left
side bottom hinge. Replace the left
side middle hinge. You can get it from
the installation tool (box) supplied with
your new Samsung refrigerator. And
reattach it by using 1 screw and 2 bolts.
(Should use screw) for screw
and wrench for bolts.)
Cover the middle hinge cap.
Remove 1 cap and 3 screws on the left side
of the refrigerator where you will reattach
the left side middle hinge. (Refer to the left
picture.) And replace them on the former
right side middle hinge position like the right
picture. When removing 2 plastic screws,
pick them up with tweezers (forceps,
nippers, pliers) while turning them with
screw).
5 2 5 2
1
2
3
DA68-01817A-07.indd 16 2010.10.7 2:28:15 PM