27
EN
G
LIS
H
Setting Option
High Temp Button
High Fan Button
Mode change
Low Temp Button
Low Fan Button
Entering mode for
setting option
Option
setting mode
Setting Option
1. Remove batteries from the remote controller
2. Insert batteries and enter the option setting mode while pressing High Temp button and Low Temp button.
3. Each time you press Low Fan button, 7-seg on left side is increased by “1” and each time you press High Fan button,
7-seg on right side is increased by “1”
4. You press
button to move to the next setteing page.
5. After setting option, press
button to check whether the option code you input is correct or not.
6. Press operation button
with the direction of remote control for set.
• SEG1, SEG7, SEG13, SEG19 are not set as page option.
• Set the SEG1, SEG7 as ON status and SEG13, SEG19 as OFF status.
EX) Set the each option separately since you cannot set the ADDRESS setting and indoor unit
installation setting option at the same time.
(AQV07/09/12/18/24****)
Indoor unit
Model
Option NO.
MALDIVES
AQV07PSBN 011305-1740E9-271416-372500-03403D-112E3F
AQV09PSBN 011305-17421D-271921-372500-03403D-112E3F
AQV12PSBN 011305-17423D-272328-372500-034B46-11474D
AQV18PSBN 012305-17421D-27323C-372600-034743-113F47
AQV24PSBN 012305-17427B-27444E-378200-034C4B-104442
JUNGFRAU
AQV09YWAN 010345-17C0F5-271920-372500-033B32-102A3C
AQV12YWAN 010345-15C215-272328-352500-03453F-10404E
AQV18YWAN 010345-15C20A-27323C-384500-034740-104248
Summary of Contents for RJ040F2HXEB
Page 1: ......
Page 36: ...EEE Y netmeli ine Uygundur This EEE is compliant with RoHS...
