setting up
_11
01
SETTING UP
1. Separate the cap on the middle
hinge.
2. Remove the screw attached to the left and right middle hinges with a
philips screw).
Remove the 2 hex head bolts attached to the left and right middle
hinges with an allen wrench(3/16”).
Disassembling the freezer door (DRAWER TYPE - RF217,RF197)
Middle Hinge
Allen wrench
4. Remove the screw that holds
the ground wire with a philips
screw).
5. Separate the hinge from the
electric wire and ground wire as
shown above.
6. Lift the door straight up to
remove.
Be careful not to drop and
scratch the doors while removing
them.
Disassembling the fridge door
1. Remove the 3 screws holding
down the top table and remove
it.
2. Disconnect electric wire on the
top of the refrigerator.
3. Remove the 3 hex bolts that
hold the hinge on the top of
the refrigerator with the 10mm
socket wrench.
top table
Socket wrench
Be careful not to drop and scratch the fridge door while removing the fridge door!
WARNING
ground
wire
DA68-01845A.indb 11
2009.11.19 2:46:52 PM
