14_
setting up
Slot
Slot
1. Pull out the rails to the full length
on each sidle of the cabinet
evenly.
1. Place the hole in the bottom of
the freezer door over the right
side low hinge.
2. Hang the freezer door front onto
open slot on the sides.
2. Replace the middle hinge connected to the freezer.
3. Insert and tighten the screw into the left and right middle hinges with a
philips screw). Insert and tighten the 2 hex head bolts into the
left and right middle hinges with an allen wrench(3/16”).
4. Replace the cap on the middle hinge.
Slot
Reassembling the freezer door (DRAWER TYPE - RF217,RF197)
Reassembling the freezer door (SWING TYPE - RF195)
4. With the drawer pulled out fully,
insert the drawer box into the rail
system.
3. With the 10mm wrench, reattach
4 bolts to connect the rail with
the door.
Setting up your French Door Refrigerator
DA68-01845A.indb 14
2009.11.19 2:47:4 PM
