background image

30

1) Button Touch Tone ("DING-DONG")
1-1) When each button on the control panel is pressed,it will send out an input signaling "DING-

DONG"sound.

1-2) When buttons are not pressed correctly,it won't send out the "DING-DONG"sound.
1-3) Buttons are recognized within 0.2 sec and when buttons are pressed continuously, it sends out only

a "DING"sound.

1-4) This Button Touch sound has priority over other alarm sounds.

2) Door-Open Alarm Sound
2-1) With either of the doors open for more than 2 minutes continuously, it sends out a “ Ding Dong”

sound.

2-2) When the door keeps being opened, it will send out the "DING-DONG"sound every minute.
2-3) The alarm sound will stop immediately when both of the doors are closed.

3) Alarm Sound for Forced Operation &Forced Defrost ("BEEP" Sound)
3-1) When Forced Operation or Forced Defrost is selected, it will send out a "BEEP"sound.
3-2) When the Forced Operation button is pressed once,the "BEEP"sound (0.25Sec ON/0.75Sec OFF)

will keep on until it is cancelled automatically (24 Hr)or forcefully.

3-3) During Forced Operation, it will send out a "BEEP"sound until the Defrost is completed (idling time

included)or the cancellation is selected.)

3-4) With Forced R-Defrost,it will send out a "BEEP"sound (0.1sec ON/0.75sec OFF)and with Forced

F/R-Defrost,it will send out a "BEEP"sound (0.5sec ON/0.5sec OFF).

Temp Control &Operation Functions

11-6)  Buzzer Alarm Function

1) The refrigerator is automatically controlled by temperature control programs according to the ambient

temperature. The machine compartment fan is controlled as follows according t o t he a mbi ent
temperature. The fan does operate or does not operate according to operating conditions with Comp
on. So, make sure to take it into consideration during service.

11-7) Machine Compartment F-Fan Motor Delay Function

Machine
Compartment
Fan Delay
Function

Temp Range

Ambient Temp 71.6

(22

)or over

Ambient Temp 62.6

(17

)~69.8

(21

)

Ambient Temp 53.6 

(12 

)~60.8

(16

)

Ambient Temp 44.6

(7

)~51.8

(11

)

Ambient Temp 42.8

(6

)or under

Load Operation Status

Machine Compartment Fan On with Comp On

Machine Compartment Fan On in 3 minutes after Comp On

Machine Compartment Fan On in 6 minutes after Comp On

Machine Compartment Fan On in 9 minutes after Comp On

Machine Compartment Fan Off regardless of Comp

Summary of Contents for RB195BSBB

















































































Reviews: