21
Read these instructions completely and carefully
REVERSING THE DOOR SWING
12. Disassemble the Door S/W with tools. Be careful
not to scratch.
14. Assemble the each part into the reverse side as
below picture. Assemble the Door S/W as it is.
(Make sure not to insert it upside down)
15. Assemble Freezer Door by fitting Hinge-Low into
the grommet hinge hole. Don't forget to insert
washer with grease.
16. Fix the additional Hinge mid into the door hole.
Door S/W
Door S/W
13. Disassemble the Cap Door S/W, Sleeve and the
screws.
Cap Door S/W
Cap Door S/W
Sleeve
Sleeve
Washer
Washer
Additional
Hinge mid
Additional
Hinge mid
11. Assemble each part by exchanging its into the
reverse side as below picture.
