Samsung RB195ACBP, Service Manual

Page: 34 / 97

34
TROUBLESHOOTING
Self-diagnostics check list
LED Item
R-1- ⓐ
R-1-
ⓑ
R-1-
ⓒ
R-1- ⓓ
R-1-
ⓔ
R-1-
ⓖ
F-1-
ⓐ
F-1- ⓑ
F-1- ⓒ
F-1- ⓓ
F-1- ⓔ
F-1- ⓖ
Ice Maker Sensor Error
R-Sensor Error
R-DEF-Sensor Error
R-FAN Error
Ice Maker Error
R-DEF. Error
Ambient-Sensor Error
F-Sensor Error
F-DEF-Sensor Error
F-FAN Error
C-FAN Error
F-DEF. Error
Display error : In case of Separation of
sensor housing part, contact error,
disconnection, short circuit.
Display error by temperature : when the
sensing temperature is more than 149
℉
(+65 ℃ ) or less than -58 ℉ (-50 ℃ ).
Display error : In case of separation of
defrost heater housing, contact error,
disconnection, short circuit, or temperature
fuse error.
Display error : If defrost does not finish
though the defrost of fresh food
compartment is heating continuously for
more than 80 minutes.
Display error : In case of separation of
sensor housing parts, contact error,
disconnection, short circuit.
Display error by temperature : When the
sensing temperature is more than 149
℉
(+65 ℃ ) or less than -58 ℉ (-50 ℃ ).
Display error : In case of Feed Back signal
line contact error, separation of motor wire,
motor itself error during operation of
applicable fan motor.
Display error : When ice making kit is
harvested more than 3times and level error.
** Only for the Ice Maker applied model.
When checking the voltage of MAIN PCB
CN90 #3
↔ #4 : Shall be between
4.5V~1.0V.
When checking the voltage of MAIN PCB
CN30 #3
↔ #8 : Shall be between
4.5V~1.0V.
When checking the voltage of MAIN PCB
CN30 #4
↔
#8 : Shall be between
4.5V~1.0V.
When checking the voltage of MAIN PCB
CN31 #1
↔ #3 : Shall be between
4.5V~1.0V.
When checking the voltage of MAIN PCB
CN30 #5
↔ #8 : Shall be between
4.5V~1.0V.
When checking the voltage of MAIN PCB
CN30 #6
↔ #8 : Shall be between
4.5V~1.0V.
Voltage of MAIN PCB CN76 Pink ↔ Gray :
Shall be between 7V~12V.
Voltage of MAIN PCB CN76 Blue ↔ Gray :
Shall be between 7V~12V.
Voltage of MAIN PCB CN76
Yellow
↔
Gray : Shall be between 7V~12V.
After replacing ice maker, check the
operation by turning the appliance ON again.
After separating MAIN PCB CN72 wire
from PCB, the checked resistance value of
CN70 White
↔ Orange shall be
103/397ohm ± 10%
(Resistance value is varied by input power)
↔
Model without Ice maker (120ohm ± 10%)
Check 0 Ohm for heater short, &
æ
Ohm for
wire / bimetal Open.
After separating MAIN PCB CN72 wire
from PCB, the checked resistance value of
CN70 Brown
↔
Orange shall be
66/240 ohm ± 10%.
(Resistance value is varied by input power)
Check 0 Ohm for heater short, &
æ Ohm for
wire / bimetal Open.
Display error : In case of Feed Back signal line
contact error, separation of motor wire, motor itself
error during operation of applicable fan motor.
Display error : In case of Feed Back signal line
contact error, separation of motor wire, motor itself
error during operation of applicable fan motor.
Trouble contents
Diagnostic method
Fresh food Compartment
Display error : In case of separation of
defrost heater housing, contact error,
disconnection, short circuit or temperature
fuse error.
Display error : If defrost does not finish
though the defrost of freeze compartment
is heating continuously for more than 70
minutes.
Freeze Compartment
NW-미주향-AC 2010.6.8 3:47 PM 페이지34 in