4-6
4. Troubleshooting
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
R530/R730
TP_NUMBER
TP_LABEL
Contents
02Eh
TP_BASERAML
Test the first 4MB of RAM.
03Ah
TP_CACHE_AUTO
Autosize external cashe and program cashe size for enabling later in
POST
0D5h
TP_SWITCH_POST_TABLES
Switch To The Part Of The POST Table In compatSegment To Save
BCG
020h
TP_REFRESH
Verify DRAM refresh
029h
TP_PMM_INIT
Initializes the POST Memory Manager.
033h
TP_PDM_INIT
Initializes the Phoenix Dispatch Manager
0C1h
TP_PEM_INIT
Invoked via shutdown table to Iniialize PEM data structures
009h
TP_SET_IN_POST
Set In-POST bit in CMOS
00Fh
TP_FDISK_INIT
Disable IDE operation
014h
TP_8742_INIT
Initialize and Configure the Keyboard Controller.
01Ah
TP_DMA_INIT
Test the DMA registers
01Ch
TP_RESET_PIC
Initialize interrupt controllers
014h
TP_8742_TEST
Report if there was a Keyboard Controller failure.
0C8h
TP_A20_TEST
Perform A20 Test
032h
TP_COMPUTE_SPEED
Compute CPU clock speed in MHz
069h
TP_PM_SETUP_SMM
Perform miscellaneous OEM Initialization here before SMM Init, PCI
Init, and VBIOS Init.
03Dh
TP_ADV_REG_CONFIG
General dispatcher for alternate register advanced configuration
042h
TP_VECTOR_INIT
Initialize interrupt vectors
046h
TP_COPYRIGHT
Verify that the copyright message is intact Uses 8-bit end-around-
carry addition
045h
TP_DEVICE_INIT
POST device initialization routine
049h
TP_PCI_INIT
Perform miscellaneous OEM Initialization here, before PCI Init and
Before SMM Init.
048h
TP_CONFIG
Verify the hardware configuration and note whether we have color or
monochrome video.
0D1h
TP_BIOS_STACK_INIT
Bridge to postInitBIOSStack(oemInitBIOSStack)
0D3h
TP_SETUP_WAD
Find Space For Memory Wad And Zero It
024h
TP_SET_HUGE_ES
Make huge (4GB) segments for DS,ES,FS,GS,SS
08Ah
TP_INIT_EXT_BDA
Initialize extended BIOS data area
09Dh
TP_SECURITY_INIT
Initialize the system security engine
055h
TP_USB_INIT
Enable USB devices
014h
TP_8742_TEST
Initialize the Keyboard Controller for Keyboard Test.
052h
TP_KB_TEST
Initialize and Configure the Keyboard & PS/2 Mouse.
052h
TP_KB_TEST
Initialize and Configure the Keyboard & PS/2 Mouse.
052h
TP_KB_TEST
Initialize and Configure the Keyboard & PS/2 Mouse.
076h
TP_KEYBOARD
Report if there was a Keyboard or Controller failures.
04Ah
TP_VIDEO
The Video POST and PDS init
04Ch
TP_VID_SHADOW
Initialize video
059h
TP_PDS_INIT
Initialize the POST display service.
057h
TP_1394_INIT
Initialize the 1394 code
058h
TP_HOT_INT
test for hot interrupts
0C4h
TP_HOTKEY_START
Install the IRQ1 vector
07Ch
TP_HW_INTS
initialize hardware interrupt vectors
0B5h
TP_QUIETBOOT_START
Initializes QuietBoot.
04Eh
TP_CR_DISPLAY
Display the copyright message