7
01
Per iniziar
e
Italiano
Collegamento all’antenna
Quando il televisore viene acceso per la prima volta, le impostazioni di base vengono visualizzate automaticamente.
✎
Preimpostato: Collegare l’alimentazione e l’antenna.
Plug & Play (Impostazione iniziale)
Alla prima accensione del televisore, vengono visualizzate alcune schermate che aiutano l’utente a configurare le impostazioni di base.
Premere
POWER
P
.
Plug & Play
è disponibile solo quando sul televisore è impostata la sorgente
Ingressi
.
✎
Per tornare al passaggio precedente, premere il tasto Rosso.
1
Selezione della lingua
Premere il tasto
▲
o
▼
, quindi premere
ENTER
E
.
Selezionare la lingua OSD (On Screen Display) desiderata.
P
POWER
2
Selezionare
Demo
Negozio
o
Uso dom.
Premere il tasto
◄
o
►
, quindi premere
ENTER
E
.
• Selezionare la modalità
Uso dom.
. La modalità
Demo Negozio
è dedicata a un uso
commerciale.
• Ripristinare le impostazioni dell’unità da
Demo Negozio
a
Uso dom.
(standard): Premere
il tasto Volume del televisore. Quando il menu Volume viene visualizzato a schermo, tenere
premuto il tasto
MENU
per 5 secondi.
3
Selezionare la nazione
Premere il tasto
▲
o
▼
, quindi premere
ENTER
E
.
Selezionare la nazione appropriata.
4
Selezionare una antenna
Premere il tasto
▲
o
▼
, quindi premere
ENTER
E
.
Selezionare
Antenna
o
Cavo
.
5
Selezionare un canale
Premere il tasto
▲
o
▼
, quindi premere
ENTER
E
.
Selezionare la sorgente del canale da memorizzare. Quando si imposta la sorgente antenna su
Cavo
, viene visualizzata
una procedura che consente di impostare un valore per la ricerca dei canali digitali (frequenza del canale). Per ulteriori
informazioni, vedere
Canale
→
Memoriz. automatica
(p. 14).
✎
Premere
ENTER
E
in qualsiasi momento per interrompere il processo di memorizzazione.
6
Impostare la
Modalità orologio
Impostare la
Modalità orologio
automaticamente o manualmente.
Premere
▲
o
▼
per selezionare
Automatico
, quindi premere
ENTER
E
.
7
Fuso orario
Premere
▲
o
▼
per selezionare il fuso orario, quindi premere
ENTER
E
. (in base alla nazione)
8
Visualizzare la
Guida alla
connessione HD
.
Viene quindi visualizzata la descrizione relativa al metodo di connessione che fornisce la migliore qualità di visione HD.
9
Buona visione.
Premere
ENTER
E
.
Per reimpostare questa funzione...
Selezionare
Impostazione - Plug & Play
(Impostazione iniziale) Digitare il PIN a quattro cifre. Il PIN preimpostato è “0-0-0-0”. Per cambiare il
codice PIN, utilizzare la funzione
Cambia PIN
.
IN
ANT OUT
Antenna VHF/UHF
o
Cavo
[PC7000_Ita]BN68-02696C-00L03.indb 7
2010-03-29 오후 5:38:04