16
Deutsch
Grundfunktionen
¦
Ändern der Bildoptionen
Erweiterte Einstellungen
(verfügbar nur im Modus
Standard / Film
)
Sie können verschiedene Detaileinstellungen für Ihren Fernseher
vornehmen, unter anderem für Farbe und Kontrast.
✎
Im PC Modus können Sie nur
Optimalkontrast, Gamma
und
Weißabgleich
einstellen.
■
Schwarzton (Aus / Dunkel / Dunkler / Max. dunkel)
: Wählen
Sie den Schwarzwert aus, um die Bildschirmtiefe einzustellen.
■
Optimalkontrast (Aus / Gering / Mittel / Hoch)
: Stellen Sie
den Bildkontrast ein.
■
Gamma
: Einstellen der Intensität der Primärfarbe.
■
Expertenmuster (Aus / Muster 1 / Muster 2)
: Durch
Ausführen der
Expertenmuster
kann das Bild ohne
einen Generator oder Filter kalibriert werden. Wenn das
Bildschirmenü verschwindet oder ein anderes Menü als
Bild geöffnet wird, ist die Kalibrierung gespeichert und das
Fenster
Expertenmuster
wird geschlossen. Es dauert etwa 4
Sekunden, bis die Anzeige wieder eingeschaltet Wird. Bis dahin
sehen Sie nur ein verzerrtes Bild.
✎
Solange
Expertenmuster
ausgeführt wird, erfolgt keine
Tonausgabe.
✎
Nur verfügbar im Modus DTV (außer bei
Datendienstkanälen), Component und HDMI.
■
Nur RGB-Modus (Aus / Rot / Grün / Blau)
: Sie können die
Farbe
oder den
Farbton (G/R)
der Bildanteile
Rot, Grün
oder
Blau
von einem externen Gerät (DVD-Player, Heimkinosystem
usw.) einstellen.
■
Farbraum (Auto / Nativ / Benutzerdef.)
: Stellen Sie den
Bereich der Farben ein, aus denen das Bild erstellt wird.
Wenn Sie
Farbe, Rot, Grün, Blau
und
Zurückset.
anpassen
möchten, stellen Sie
Farbraum
auf
Benutzerdef.
ein.
■
Weißabgleich
: Einstellen der Farbtemperatur für ein
natürlicheres Bild.
R-Offset / G-Offset / B-Offset
: Einstellen der Dunkelheit jeder
Farbe (Rot, Grün und Blau).
R-Gain / G-Gain / B-Gain
: Sie können die Helligkeit jeder
Farbe (Rot, Grün und Blau) einstellen.
Zurückset.
: Hiermit setzen Sie den
Weißabgleich
auf die
Standardwerte zurück.
■
10 P Weißabgleich (Aus / Ein)
: Steuern des Weißabgleichs in
10-PunktS-Schritten durch Einstellen der Helligkeit des roten,
grünen und blauen Signals.
✎
Diese Funktion ist verfügbar, wenn der Bildmodus
auf
Film
und der externe Eingang auf HDMI oder
Komponente eingestellt ist.
✎
Manche USB-Geräte unterstützen diese Funktion
möglicherweise nicht.
Intervall
: Wählen Sie die Einstellintervall.
Rot
: Einstellen des Rotpegels.
Grün
: Einstellen des Grünpegels.
Blau
: Einstellen des Blaupegels.
Zurückset.
: ZUrücksetzen von
10 P Weißabgleich
auf die
Standardwerte zurück.
■
Hautton
: Betonen des Rosaanteils im „Hautton“.
■
Kantenglättung (Aus / Ein)
: Hervorheben von
Objektbegrenzungen.
■
xvYCC (Aus / Ein)
: Durch Aktivieren des
xvYCC
-Modus
vergrößern Sie die Detailtreue und den Farbraum beim
Abspielen von Filmen auf einem externen Gerät (z. B. DVD-
Player), das an den HDMI- oder Component IN-Eingang
angeschlossen ist.
✎
Diese Funktion ist verfügbar, wenn der Bildmodus
auf
Film
und der externe Eingang auf HDMI oder
Komponente eingestellt ist.
✎
Manche USB-Geräte unterstützen diese Funktion
möglicherweise nicht.
Erweiterte Einstellungen
Schwarzton
: Aus
►
Optimalkontrast
: Mittel
Gamma
: 0
Expertenmuster
: Aus
Nur RGB-Modus
: Aus
Farbraum
: Nativ
Weißabgleich
: Aus
▼
U
Verschieben
E
Eingabe
R
Zurück
[PC7000_Ita]BN68-02696C-00L03.indb 16
2010-03-29 오후 5:38:54