background image

permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any 

other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement 

the terms of this License with terms:

a)  Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or

b)  Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by 

works containing it; or

c)  Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as 

different from the original version; or

d)  Limiting the use for publicity purposes of names of licensors or authors of the material; or

e)  Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or

f)  Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual 

assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors.

 

All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or 

any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If 

a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material 

governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms 

to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, 

or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately 

written license, or stated as exceptions; the above requirements apply either way.

8.  Termination. 

You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify 

it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 

11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and 

until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by 

some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the 

copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for 

any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this 

section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated 

and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10.

9.   Acceptance Not Required for Having Copies. 

You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring 

solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than 

this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. 

Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so.

10.  Automatic Licensing of Downstream Recipients. 

Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate 

that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An “entity transaction” is 

a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. 

If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives 

whatever licenses to the work the party’s predecessor in interest had or could give under the previous paragraph, plus a right to possession of the 

Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose 

any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or 

other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) 

alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it.

11.  Patents. 

A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus 

licensed is called the contributor’s “contributor version”. A contributor’s “essential patent claims” are all patent claims owned or controlled by the 

contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, 

or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor 

version. For purposes of this definition, “control” includes the right to grant patent sublicenses in a manner consistent with the requirements of this 

License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor’s essential patent claims, to make, 

use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, 

a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to 

practice a patent or covenant not to sue for patent infringement). To “grant” such a patent license to a party means to make such an agreement or 

commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding 

Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server 

or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of 

the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the 

patent license to downstream recipients. “Knowingly relying” means you have actual knowledge that, but for the patent license, your conveying the 

covered work in a country, or your recipient’s use of the covered work in a country, would infringe one or more identifiable patents in that country that 

you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring 

conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, 

modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work 

and works based on it. 

A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-

exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an 

arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent 

of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a 

discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily 

for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent 

license was granted, prior to 28 March 2007.  

Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be 

available to you under applicable patent law.

12.  No Surrender of Others’ Freedom. 

61

English

BN68-02331D_Eng.indb   61

2009-06-09   �� 2:26:43

Summary of Contents for PS50B551T3W



































































Reviews: