Samsung PS50A650 User Manual Download Page 72

Page: 72 / 84

English - 1

What is ?

is an AV network system that enables an easy-to-use AV interface for users by controlling

all connected AV devices through the menu when Samsung Electronics AV devices are

connected.

Connecting Devices

The system supports AV devices supporting only.

Check if there is an mark on the AV device to be connected to the TV.
To directly connect to TV

Connect the [HDMI IN 1], [HDMI

IN 2], [HDMI IN 3] or [HDMI IN

4] jack on the TV and the HDMI

OUT jack of the corresponding

device using the HDMI

cable.

To connect to Home Theatre

Connect the [HDMI IN 1],

[HDMI IN 2], [HDMI IN 3] or

[HDMI IN 4] jack on the TV

and the HDMI OUT jack of

the corresponding

device using the HDMI

cable.

Connect the HDMI IN jack

of the home theatre and

the HDMI OUT jack of the

corresponding

device using the HDMI

cable.

➢

Connect the Optical cable between the Digital Audio Out (Optical) jack on your TV and the Digital

Audio Input on the Home Theater.

➢

When following the connection above, the Optical jack only outputs 2 channel audio. You will only

hear sound from the Home Theater’s Front Left and Right speakers and the subwoofer. If you want

to hear 5.1 channel audio, connect the Digital Audio Out (Optical) jack on the DVD player or Cable/

Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theater, not the TV.

➢

Connect only one Home Theater.

➢

You can connect an device using the HDMI 1.3 cable. Some HDMI cables may not support

functions.

➢

works when the AV device supporting is in the Standby or On status.

➢

supports up to 10 AV devices in total. Note that you can connect up to 3 devices of the same

type.

Device 1

HDMI 1. Cable

Device

Device 4

Device 1

Device Device

HDMI 1. Cable

Home Theatre

Device 4

HDMI 1. Cable

BN68-01703A.indb 71

2008-07-22 오전 11:46:41

Summary of Contents for PS50A650





















































































Search results

Summary of Contents for PS50A650

Reviews:

Related manuals for PS50A650

Brands by name

Popular brands

Samsung PS50A650, User Manual

Search results

Summary of Contents for PS50A650

Reviews:

Related manuals for PS50A650

Brands by name

Popular brands