Operation Instruction & Installation
11-4
Samsung Electronics
■
Programming the Remote Control for Other Component
Your TV comes equipped with a universal remote control. In
addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box, DVD, and Set-Top Box (even if your
VCR, Cable box and DVD are made by manufacturers other than
Samsung).
The remote control might not be compatible with all
VCRs, DVD players, Cable boxes, and Set-Top Boxs.
1
Turn off your VCR (Cable box or DVD).
2
Press the MODE button to switch the remote control to the VCR
(CATV or DVD) mode.
The remote control has five modes : TV, STB, VCR,
CABLE and DVD.
3
Press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD) code listed on the
next page for your VCR (Cable box or DVD).
Example: To enter code “6”, press 0, 0, and 6.
To enter code “76”, press 0, 7, and 6.
5
Press the POWER ( ) button. Your VCR (Cable box or DVD)
should turn on. If it turns on, your remote control is now set
correctly.
If it does not turn on, repeat the steps above, but try one of
the other codes listed for your particular brand.
6
Once your remote control is set up, press the MODE button any
time you want to use the remote control to operate the VCR
(Cable box or DVD).
When your remote control is in STB, VCR, CABLE or
DVD mode, the volume buttons still control your
television’s volume.
When your remote control is in TV mode, the VCR or
DVD control buttons (rewind, stop, play/pause, and fast
forword) still operate your VCR or DVD.
Summary of Contents for PS42S5HX/XEE
Page 23: ...Alignment Adjustment Samsung Electronics 3 9 H L Point L L Point ...
Page 44: ...Block Diagram Samsung Electronics 7 1 7 Block Diagram 7 1 Overall Block Diagram ...
Page 46: ...Block Diagram Samsung Electronics 7 3 7 2 3 Logic Board Block Diagram ...
Page 47: ...Wiring Diagram Samsung Electronics 8 1 8 Wiring Diagram 8 1 Overall Wiring ...
