manualshive.com logo in svg

Samsung PS42S5HX/XEE, Service Manual

Share
Download
Samsung PS42S5HX/XEE Service Manual Download Page 40

Troubleshooting

6-6

Samsung Electronics

6-3 Trouble-shooting with New Features

6-3-1 Installation & Connection

Problem

Solution

The unit does not turn on when I
press the Power button on the
remote control.

■

Check to see if the power cord is connected.

■

Confirm that the Device Selection of the remote control is set to TV.

A normal broadcast is not
displayed.

Check to see if the antenna cable has been properly connected.

Cable broadcasting does not
work.

Install a satellite antenna (Parabola) and connect it to the TV.

Satellite broadcasting does not
work.

Subscribe to a local cable broadcasting firm and get support.

6-3-2 Menu & Remote Control

Problem

Solution

The remote control does not
work.

■

Press the Select Device button to select the TV or external device.

■

Replace the battery of the remote control with a new one.

■

Insert the battery making sure the polarity (+,-) is correct.

■

Check if the angle or the distance is sufficient, or if there is any interference between the   

product and the remote control.

■

Make sure the user has pressed the correct button.

■

To avoid direct sunlight to the receiving panel of the TV, remove any indoor lighting or 

change the location of the TV.

■

Check if the power switch at the back left of the TV is turned on.

Cannot change the channel with
the remote control.

■

Press the Select Device button to select the TV.

■

Change the channel using the remote control of the cable or satellite receiver.

Cannot select an A/V channel.

Press the TV/AV button and check if the AV item is grayed out. When the AV item is grayed
out, you cannot select an A/V channel. Check if the connector is properly connected.

Cannot select a menu.

Check if the menu is grayed out. If a menu is grayed out, it cannot be selected.

Summary of Contents for PS42S5HX/XEE






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands