The mains lead is attached to the rear of your PDP.
1
Plug the mains lead into an appropriate socket.
Result:
The Standby indicator on the front of the PDP lights up.
➢
The main voltage is indicated on the rear of the PDP and
the frequency is 50 or 60Hz.
2
Press the “
I /
” button on the front of the PDP (or
POWER
(
)
button on the remote control) to switch the PDP on.
Result:
The programme that you were watching last is re-
selected automatically.
➢
If you have not yet stored any channels, no clear picture
appears. Refer to “Storing Channels Automatically” on page
18 or “Storing Channels Manually” on page 19.
3
To switch your PDP off, press the “
I /
” button again.
Your PDP can be placed in Standby mode, in order to reduce the
Power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the
POWER
(
) button on the remote control.
Result:
The screen is turned off and the Standby indicator on
the front of the PDP lights.
2
To switch the PDP back on, simply press the
POWER
(
) button
again or a numeric button.
➢
You can also switch on by pressing the
P
or
button.
Switching On and Off
Placing in Standby Mode
TV
TV
Front of the PDP
English - 13
BN68-00700B-00Eng_1012 10/12/04 2:30 PM Page 13
Summary of Contents for PS-37S4A1
Page 66: ...Memo English 66...
Page 67: ...Memo English 67...
