Installing the Display on the Wall Attachment Panel
(continued)
➢
The exterior of the PDP may be different than the picture.
(Assembly and installation of the plastic hanger is the same.)
1
Remove the screws from the back of the PDP.
2
Use the screws and assemble the plastic hanger.
3
Tighten the screws of the plastic hanger to the back side of the PDP.
4
Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on the PDP (
!
) to
secure it to the wall mount bracket (
@
). Tighten the screws as shown (
#
) so that the PDP cannot be
separated from wall mount bracket.
PDP panel
Wall attachment panel bracket
Wall
☛
◆
Please ask the installers to install the wall mount bracket.
◆
Please be sure to check if the plastic hanger is
completely secured on both the left and right side after
hanging the PDP on the wall mount bracket.
◆
Please avoid catching your fingers while installing and
adjusting the angle.
◆
Please tightly secure the wall mount bracket to the wall
to avoid injury from a falling PDP.
English - 11
BN68-00700B-00Eng_1012 10/12/04 2:30 PM Page 11
Summary of Contents for PS-37S4A1
Page 66: ...Memo English 66...
Page 67: ...Memo English 67...
