Samsung ProXpress M4080 Series Service Manual Download Page 188

Page: 188 / 222

4. Troubleshooting

► Error Code

S3–3122

► Error message

Scanner is locked. Please try to release scanner lock

► Symptom

Scanner lock error has occurred. CIS does not move.

► Troubleshooting method

1) Check if the CIS unit is moving when power on.

2) Check if the flat cable is connected to the CIS unit properly. Re-connect or replace the cable.

3) If the CIS is defective, replace it.

4) Check if there is any defective part in the scanner unit. (Gear, Belt, Motor etc.)

5) If the problem persists, replace the main board.

► Error Code

S4-2111

S4-2112

► Error message

Fax Memory is almost full. Print or remove received fax Job

Fax memory is full. Print or remove received fax Job

► Symptom

The fax memory is almost full.

► Troubleshooting method

1) Print or remove the received fax job in Secure Receive.

4-91

Summary of Contents for ProXpress M4080 Series






















































































































































































































Search results

Summary of Contents for ProXpress M4080 Series

Reviews:

Samsung ProXpress M4080 Series, Service Manual, Page: 188 / 222

Search results

Summary of Contents for ProXpress M4080 Series

Reviews: