English-5
Safety information
2
-3
WARNING
Power related
• Please prevent any risk of electric shock
or fire.
– Do not damage the power cord.
– Do not pull the power cord too hard or
touch the power plug with wet hands.
– Do not use a power source other than
100-240 V~ and also do not use a multi
outlet to supply power to number of
devices at the same time. (Do not leave
the cord carelessly on the floor.)
– Do not use a damaged power plug,
power cord or loose power outlet.
• Clean dust or any foreign matters on the
pin and contact part of the power plug.
– There is a risk of electric shock or
malfunction.
Before use
• Do not use POWERbot near a heater or
combustible materials.
– Do not use powerbot near fire or flame
such as a movable heater, a candlelight,
a desk lamp, a fireplace etc. or in a place
where combustible materials such as
gasoline, alcohol, thinner etc. exist.
• Make sure there are no dangerous objects
around the POWERbot’s cleaning area to
prevent collision and unplug any electric
heaters or fans.
• The POWERbot is intended for household
use therefore do not use it in an attic,
basement, storage, industrial building,
out of indoor space, places with moisture
(such as bathroom, laundry), on the table
or shelves.
– The POWERbot can be damaged or
malfunction.
• Be sure POWERbot does not pass through
or touch any kind of liquids.
– The POWERbot can be severely
damaged and it may contaminate other
areas if the wheels pass through liquid.
• Attach the boundary markers on a place
where the POWERbot may fall such as
a stair or banister to prevent product
damage and injury.
– Please keep the cliff sensor clean all the
time for safety.
• Do not spill any liquids on the docking
station.
– There is a risk of fire or electric shock.
• Do not use the battery charger / docking
station for anything other than its
intended purpose.
– There is a risk of fire or severe damage
to the docking station.
• Always keep the cliff sensor clean for
your safety.
In use
• If any abnormal sounds, smells or smoke
come from POWERbot, immediately shut
off the emergency switch at the bottom of
POWERbot and contact a service center.
Cleaning and maintenance
• When power cord is damaged, contact
a service center to get it replaced by
certified repairman.
– There is a risk of fire or electric shock.
• Please check with a Samsung Electronics
service center when exchanging batteries.
– Using batteries from other products can
cause malfunction.
VR7000_Q_guide_EN_00763D-14_SA.indd 5
2019-09-04 오후 10:08:07
