English
Advanced Features
Troubleshooting for
Problem
Possible Solution
does not work.
•
Check if the device is an device. The system supports devices only.
•
Only one receiver (home theater) can be connected.
•
Check if the device power cord is properly connected.
•
Check the device’s Video/Audio/HDMI cable connections.
• Check
whether
(HDMI-CEC)
is set to
On
in the setup menu.
•
Check whether the TV remote control is in TV mode.
•
Check whether the remote control is compatible.
•
doesn’t work in certain situations. (Searching channels, operating
Media Play
or
Plug & Play
(initial
setup), etc.)
•
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
•
Check if the Function of device is set on.
I want to start .
•
Check if the device is properly connected to the TV and check if the
(HDMI-CEC)
is set to
On
in the Setup menu.
• Press
the
TOOLS
button to display the menu and select a menu you want.
I want to exit .
•
Select
View TV
in the menu.
• Press
the
SOURCE
button on the TV remote control and select a non- device.
• Press
,
PRE-CH
, and
FAV.CH
to change the TV mode. (Note that the channel button operates
only when a tuner-embedded device is not connected.)
The message “Connecting to
device...” appears on the
screen.
•
You cannot use the remote control when you are configuring or switching to a view mode.
•
Use the remote control when the setting or switching to view mode is complete.
The device does not play.
•
You cannot use the play function when
Plug & Play
(initial setup) is in progress.
The connected device is not
displayed.
•
Check whether or not the device supports functions.
•
Check whether or not the HDMI cable is properly connected.
• Check
whether
(HDMI-CEC)
is set to
On
in the setup menu.
•
Search devices again.
•
You can connect an device using the HDMI cable only. Some HDMI cables may not support
functions.
•
If connection is terminated because there has been a power interruption or the HDMI cable has been
disconnected, please repeat the device scan.
The TV Program cannot be
recorded.
•
Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
•
Connect the optical cable between TV and the receiver.
wj[`WTjiu]_TWZXX[iTWWsWYUGGGZ]
YWXWTW^TWYGGG㝘䟸GXaWZaZ^